Applying Sticker

Now I explain how to applying sticker on your car.

First wash your car first, make sure no one bit of dirt.
Then peel the masking tape, and wet with soapy water (soapy water not too thick), wet the car also will be in paste.
Furthermore, apply it in your car, set the position, and than remove the water . Remove water with glass cleaner or 3M rubber.
Make sure that no air bubbles at all, then you can wait for it to dry or you can provide artificial heating with hot gun or hair dryer.
Once dry slowly peeled masking layer tapenya, done.

Tools needed:

• Water shampoo (not too thick)
• Cutter (for smoothing)
• 3M/glass cleaner
  
• Hot Gun / Hairdryer